Got a model of slaughterfish, had to add some supports so it would be possible to print. Will print and update with pictures, settings, and any tweaks I have to do on the model. I do not own these models. BETHESDA gets all credit for these models.
Printer:
BCN3D Sigma R17
Rafts:
No
Supports:
Yes
Infill:
20% on model, 15% support
Notes:
.2mm layer height, 1.2mm shell thickness, retaction enabled .075mm z hop, 1.2mm bott/top thickness, 20%fill density, 25mm print speed, 210C PLA and PVA extruder temp, 65C bed temp ( I have a glass bed so you have to might adjust), support everywhere. Check Photos for detailed information on my settings. I use CURA they get credit for the software.
