A series of Telescoping Spyglasses, each one prints fully assembled.
The name says it all, the first is a two piece telescope that prints 3 inches tall, extends to about 5.5 inches. I made this to test the clearances and make sure the stops work well so when it is fully extended it sort of sticks in place until you collapse it.
The other two are a lot larger, and three piece telescoping. One fits a 4 inch printed height and the other a 5 inch printed height.
Optimized for a .4mm nozzle
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
Printing with at least 4 walls is recommended for the larger ones.
