Succulent Planter for your home or office.
Printed with filament change (not by gcode if not through LCD control) for experimental purposes. You can print it in one color only with no further changes.
Enjoy the nature!
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
0%
Notes:
Print Settings:
0,2mm layer height
0% Infill
0 Top Layers
3 Bottom Layers
2 Perimeter Shells*
*Nº of shells using a 0,6mm nozzle. If using smaller nozzle it is recommended to increase Perimeter (Exp: 0,4 Nozzle / 3 Bottom / 3 Perimeter)
This thing was printed using PLA Fucsia by PrintaLot
