This model is my version of Mercy's healing staff from Overwatch. While not 100% game accurate, this model is extremely close to the in game model, with certain details omitted to ensure durability for long term prop use. This is a pretty involved model and requires a lot of post-finishing to get the look just right. It uses all real hardware rather then printed hardware, here is a list of what you will need to complete this prop.
Staff shaft: https://www.mcmaster.com/#catalog/123/3644/=18c6jlq
Staff inner shaft: https://www.mcmaster.com/#catalog/123/142/=18c6jxb
6x M4 1.25" screws
4X M4 .75" screws
Assorted 6-32's and 8-32's button head screws
The fins do articulate, but otherwise this is a static prop. I chose to paint mine in the cobalt scheme but the model is the same as her original white staff.
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.200 microns for most parts
Infill:
30%
Notes:
This model really should be printed in PETG or Nylon to ensure prop durability. I used a 0.6mm nozzle for my parts with 4 perimeters, I would suggest 4-5 perimeters on a machine with a 0.4mm nozzle.
The foot of the staff is designed to be printed in ninja-flex to give it a proper rubber foot.
