by yeg3d, published
This Easter, print Ducky the Lop Eared Bunny. Modeled with ZBrush, he's as cute as he is plastic.
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Cyan PLA from Jet
Printed with support, 70 degree overhang angle
Printed with a brim, 20 lines
200 microns (0.2 mm layer height)
100% Scale
175 mm Height
20h 26m Print Time
0.8 mm Shell Thickness
6% Fill Density
90 mm/s Print Speed
0.3 mm Z hop when retracting
92 m of filament used
4 mm cut off object bottom
230C Print Temperature
Sliced with Cura
Modeled with ZBrush
Support and bottom cut off are a must when printing this model.
