by CorbeauProd
I saw Trovarion's video on this model and I decided to launch a project about it. Everything is printed at 20% infill. Be careful with plugs that go on en shoulder's holes as they are very tiny. I did not print the 90mm base (too much PLA and to much time for a single round "thing") nor I did print the metallic structure closing the cockpit.
The whole model is designed to have a very specific stance, one leg up and one arm aiming on the right side with the pilot's head turned in that direction.
Big parts take 2 hours, medium parts take 1 hour and small bits takes an average 15mn so that it's a quiet quick project to print.
I also secured the build with tiny bits of metal linking parts as you can see on the video playlist.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.4
Infill:
20%
Filament_brand:
Polymaker Polyflex
Filament_color:
Black
Filament_material:
PLA
Custom Section
