by Witalian1985 

Hello world. This is my first model. Made based on the Magadan TV tower. This miniature is about seven centimeters (about two and a half inches) high.

Printed on ANYCUBIC Photon S.
Select the print settings according to the type of resin you are using!

Print Settings

Printer brand:

Anycubic

Printer:

Photon

Rafts:

Yes

Supports:

Yes

Resolution:

0.16

Infill:

25%

Filament_brand:

Anycubic Plant-based UV Resin

Filament_color:

Green

Filament_material:

UV Resin

Notes:

Select the print settings according to the type of resin you are using!

Post-Printing

Be very careful when separating supports. The model is very fragile. If the model is bent after printing, heat it up with a hairdryer and straighten it. Painted from an airbrush. But all the work can be done with a simple brush. I used water based acrylic paint. Do not hurry. The result is worth it.

How I Designed This

I was inspired by this old TV tower. When I went to *** in search of a similar one, I did not find anything. I had to arm myself with a camera, take some photos and model this beautiful structure myself. I used STONE in the work and it took me about two weeks. But now the site has not only the Tokyo TV Tower and the Eiffel Tower, but also the Magadan TV Tower.