by sedwards2009
British QF 17 pounder anti-tank gun mounted on the 25 pounder carriage from early 1943.
Designed for 1:100 scale and to be printed in pieces and finally assembled with glue.
I've designed and printed this for an Ultimaker 3 (or later) with a 0.25 PrintCore and 0.06mm layer height.
Printing notes:
Most things should be printed with support.
Tyres should be printed facing up with NO support. 4x
Limber door should be printed with no brim. Bend the handles slightly after printing.
Turntable should be printed with no brim.
Cura's "support interface" feature is also useful here.
