by Spookz0r

Forgot to publish this... Uploaded it in January 2020, and moved on with other stuff so if something strange happens when you print it I'll probably not fix it :P

Batman V Superman inspired Batman figure. 

Modelled in Mudbox and 3Ds max, rigged in Maya.

Either print the full version with a lot of support, or print the splitted version with a lot of support. Use tree support to reduce the wasted material.

I printed it in the scale that is uploaded but also tried a small print (5 cm high) just to try and that worked as well (of course with zero details but everything was thick enough to print on a 0.4mm nozzle).

If you're printing the full version that is all you need.

If you're printed the splitted version you will have to glue Part 1 and Part 2 together and then glue Batmans butt and right foot on the wall.

Pro-tip: Paint Batman before you glue him to the wall for an easier paint job :D

Print Settings

Printer brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.12

Infill:

10 %

Filament_brand:

eSun

Filament_color:

Black

Filament_material:

PLA+

Notes:

At least 2 shells, preferably 3 shells. I printed the splitted version with tree support (in Cura). The railing got loose from the bed and that part of the print failed :/ Other than that it's an easy print with a tuned printer. Glued Batman_Part_1 and Batman_Part_2, primed and painted it. Painted the wall separately and then glued batman on to the wall. Finally I put the wall on the printable stands.