by Makerbog 

"Hi Amigos! How y'all doin'!"

Here we have Spike's Swordfish II from Cowboy Bebop. I've mixed parts from GuidoMeesta's and WillisMakerBot's models, as well as adding a few remodels and new features.

6 M2 screws hold the engine assembly together, and you can remove side panels to expose an engine core. Or you can skip the screws and glue it all together for something more permanent.

All the parts can be printed separately so those of you with a single colour printers can print in the right colours individually and avoid painting.

Optional Engine assembly with screws:
3 M2 8mm
3 M2 16mm
(check the image for a top down view of how to bolt it together)

Printed in PLA, many of the pegs can hold the parts together on their own (I left the wingPegs and fuselagePegRear unglued so it's easier to dismantle for storage). Everything else is held together with krazy glue (cyanoacrylate).

Blend file is included if there's anything you want to modify yourselves.

"See you space cowboy."

Print Settings

Printer brand:

Prusa

Printer:

I3 MK3S

Rafts:

Yes

Supports:

Yes

Resolution:

0.1mm

Infill:

15%

Filament_brand:

Filaments.ca

Filament_material:

PLA

Notes:

Some parts will require rafts/supports. Some print well on their own.