by Choloseg

With this modification the weapon can

• Fold / Unfold the stock

*Cocking bolt action.

*Trigger action releases the cock.

*The magazine window has been opened to allow the bolt to catch a round .

*Bolt has been mechanized to use extractor and removed the fixed spring cap to allow to use a binding spring for recoil. The diameter has been reduced 1mm for better clearance.

In this moment its fully printable, I still want to make an operative magazine to hold dummy rounds but it will no affect the published parts.

Print Settings

Printer:

BQ hephestos

Supports:

Yes

Resolution:

0.2

Infill:

20

Filament_brand:

geetech

Filament_material:

pla

Notes:

You have to print all the parts of this kit and the following parst from de original source: STERLING_BARREL.STL: STERLING_BAYLUG.STL STERLING_CATCH_BRKT.STL STERLING_CATCH.STL STERLING_CHG_HNDL.STL STERLING_DEF.STL STERLING_END_CAP.STL STERLING_FRNT_SGT.STL STERLING_FS_FRNT.STL STERLING_FSG.STL STERLING_GRIP.STL STERLING_MAG_CATCH.STL STERLING_MRB.STL STERLING_MZL_SCRW.STL STERLING_MZL.STL STERLING_REC_FRNT.STL STERLING_REC_REAR.STL STERLING_SEL.STL STERLING_SET_SCRW.STL STERLING_TGR_GRD.STL STERLING_END_CAP_NDR1.STL Using the instructions given in the diagram substitute the parts missing with the kit parts. Use a spring for binding as main spring. You have to use pen spring in several parts like trigger, sear and extractor.