by Fanaatti
I decided to create another character from KonoSuba. Like the previous one, most of the stuff is created in 3d printing in mind, so clothes should be thick enough to print well at 0.4mm nozzle. Smaller details, such as the bolt of the necklase (or is it belt?) might not print well, but I try to fix them on later on. I will also later slice the model such a way that printing can be done in separate pieces, as it seems that the hat takes a ton of support material.
I have no idea how the model would print, but I try to check them in Cura before publishing, so there shouldn't be any major artifacts around.
Edit.
16.3.2020. I added the explosion pose. There is two model: one with the base and another one without the base. Also, I noticed some problems with the Megumin and Chomosuke, as the clothes were not thick enough if scaled down. I will fix this later on and add the files. Also will add another one without the base.
If there is some specific pose you would like to see, don't be afraid to ask for it (at this point it is fairly simple procedure to modify to any pose).
