by OddWorks
it is here!!!! the halo plasma repeater!!!!!
the model is 1;1 scale prop from the halo franchise!
features of the model include the opening top to reveal internal detail as well as opening side panels.
wanna see what is I'm working on next? or if you guys wanna vote on what I'm gonna make next? keep an eye out on my social media :D
https://www.facebook.com/OddworksDesign/
https://www.instagram.com/oddworks3d/
wanna help me continue to make models have a look at my Patreon.
https://www.patreon.com/OddWorks
PRINTING INSTRUCTIONS.
this model is pretty straight forward but there are a few things to keep in mind when building the model.
some parts of the model holes in the model for a part called PEG that is used to help Align parts.
when gluing in the internals make sure you have installed the SIDE plates first! if you install the internals first you will not be able to install the side plates!
the side plates have holes in them for magnets to keep them shut.
to build this model you will need
x4 M3 x 10mm bolts
x8 M3 x 12mm bolts
x4 3mm x 5mm magnets
