by davidedc
Pay attention to the hands, not so easy to print in small dimensions. If you use Cura, I suggest you to print with "tower supports". To get an acceptable dimension for a kyechain print it scaling to a range between 10 and 20% of the original size.
Consider to make a donation on PayPal https://www.paypal.me/davidedicori
In addition, you can fill in this short formhttps://docs.google.com/forms/d/1abru6RmM_TsZtsBgm1_NhKqbQdhnQfkF1-StH-2gnx0/prefill . Your ideas and suggestions are always welcome!
Supports:
Yes
