by naikymen
The door knob was attached too loosely to the wood with a piece of metal.
So i decided to look for some nice pet, willing to hold it in place.
If you can model your door knob approximately in tinkercad, please feel free to copy the thing over there and adapt it to fit yours: https://www.tinkercad.com/things/dZpm2oBXQwD-manija-puerta/edit?sharecode=3lWP-FAcTTNF5zwq24txIVE1sorNDN58BlwjoOxhhkE=
The holes in the door behind fit M4 screws nicely, so the model has holes for two of those.
Also, there is a badly designed "pendorcho" to cover the hole of the top M4 screw. I had to remove some palstic from it after printing.
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10
Filament: Printalot PLA Black
Notes:
I used supprot enforcers ONLY for the mouth part.
The rest prints nicely without them.
I also used support blockers to prevent supports from generating inside the screw holes.
Remove some plastic from the "pendorcho" if it gets displaced when releasing the door knob.
