by merzod
The toy for my daughter Alice.
Big thanks to https://monofilament.com.ua/ for sponsoring this model, you guys are awesome!
For toy assembly you will need sharp knife and small file.
During designing I tried to keep real proportions. But this brought at issue: legs should be thin but strong enough... that is why leg joins are pretty tight and require some force to join together.
The beset way to join them is to send/extend a groove (check neсk.stl) and other outer part then apply some force. But pay attention, too much force can break the part.
I would recommend print legs twice to have spare parts.
During watching good old movie "Honey, I Shrunk The Kids" my daughter were extremely upset when the ant was killed by scorpion. So I decided to create an ant toy in a memory of good buddy ant who died but saved kids.
Things to print with brown:
head.stl
body.stl
leg_1_b.stl (copy and mirror)
leg_2_b.stl (copy and mirror)
leg_3_b.stl (copy and mirror)
leg_holder.stl (6 pc)
lip.stl
Things to print with black:
ass.stl
eye_left.stl (2 pc)
leg_1_c.stl (copy and mirror)
leg_2_c.stl (copy and mirror)
leg_3_c.stl (copy and mirror)
nek.stl (2pc)
tooth_left.stl (copy and mirror)
us_left.stl (copy and mirror)
