by Epelson

This is a REMIX of the Leshen by Hataru. As he said, File was taken directly from the Witcher 3 game files. I as him take no credit for this amazing design and cool creature.

You can orientate it and resize to your liking but this is a optimal size to be printed and placed on your pc desk.

I made a bust with a round base out of the original file, so it can be displayed as a mini sculpture.

Hope you'll like it and enjoy printing.

Print Settings

Printer Brand:                          

Creality

Printer:                          

CR-10S

Rafts:                          

No

Supports:                          

Yes

Resolution:                          

0.16 with 0.4 nozzle

Infill:                          

20%

Filament:                                            Creality PLA                                        Black                                        

Notes:

Settings that I listed are for this file specifically:

• Lesh - Bust - All 3 Parts for Printing.3dmbak.stl -
  and need Supports especially for the horns
  (some supports need to be placed on one horn branch so they would support the one above it, So you need to select supports that go Everywhere not just from the baseplate to the model. It's mostly unnoticeable when removed and the whole camera friendly side of the model isn't effected by the supports since they are only on the back sides of the parts and are super easy to remove.)

I used this method and it worked great. (print took a bit less then 13 hours at 100% speed)

Post-Printing

Post Printing -

-Remove supports
-Glue the horns