by 3D-Unique

The Pen Holders with the Mixing Tank (Blender) model or with the Hopper model displayed, are ideal corporate gifts for clients that work in factory environments.
For easy printing and assembly, the model has been broken down into slip on components. This also allows for usage of varies colours from a printer that can only print one colour at a time.
Attached are photos of my 3D prints produced on the Creality Pro 10S, using PLA without finishing products.
The autocad dxf format of the blender assembly is attached, for you convenience.
The name band sleeve I use for my clients slips into position, so can be excluded from your assembly. A sleeve with your logo could be printed and slipped on instead, without having to modify the rest of the model.

Print Settings

Printer Brand:                          

Creality

Printer:                          

CR10S PRO

Rafts:                          

Yes

Supports:                          

Yes

Resolution:                          

High

Infill:                          

20%

Filament:                                            Da Vinci Lab PLA                                        Blue and Black                                        

Notes:

I used 100% infill for the piping.

Post-Printing

Component slip into each other similar to how Lego would. I havn't used any finishing products. Just the usual sanding with a nail file when necessary. I used black silicon to fill the font indentation, then wiped away the excess on the surface, as shown on the attached image. Paint may work as well.