by AbuMaia
A Deathly Hallows sigil to hold 5 wands. At 100% the holes are 3mm, and may need to be drilled out to fit your wands, or you can scale up the design.
Printer:
MakerFarm i3v 8"
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
15% Gyroid
Simple design in OpenScad. A vertical cylinder with $fn=3 to give it three sides differenced out of a slightly larger one, two regular cylinders differenced to make the circle, and a long skinny cube for the line.
