by FraLan

A small creature I designed and modeled, perfect to be used to play i.e. DnD or other board games or even to just stand around. Everything about this mesh is made by me.

WARNING! The first three images are renders, the printable 3D models have slight differences.

I recommend scaling the mesh up. The one in the pictures is 200%.

The bookmark will probably be too small to print, but you can simply make one out of paper or make it bigger.

Every part except the staff has holes to guide, where the other part belongs.

Every part except the hat has to be glued (the book not necessarily but I still recommend it.).

And now, happy printing ^^.

Print Settings

Printer Brand:                          

Creality

Printer:                          

Ender 3

Rafts:                          

Doesn't Matter

Supports:                          

Yes

Resolution:                          

0.1

Infill:                          

10% but can be higher

How I Designed This

At first I looked for inspriration, after I had some sort of Idea what I wanted to make, I drew a Conecpt of what I wanted. After that I started Modeling. I starded with the head, after that I did the body. The next step was to make the hat which wasn't really challenging. Than I modeled the book and both arms. After I merged the Arms with the Body I created the staff, the legs and the shoes. The last thing I had to do now was the plate he's standing on and the Mesh was finished. After that I gave hime the material and set up the light. I later cut the mesh in half so I could print it.

The very rough Concept I drew

The mesh without any materials (except the light and background material obviously)