by tjsoco
Easter egg holders.
Includes OpenScad source, so you can make your own custom versions.
See "How_to_Meshmixer_Voronoi.txt" for making your own holey models.
Before you print, measure your egg diameter where you want it to rest on the holder and make your model match. Make it match by either editing the *.scad and making a new *.stl file, or by scaling it in your slicer.
These models have been tuned to allow printing without rafts or support, so that they print well on my low cost printer.
It seems that Thingiverse can only render OpenScad files number 1 and 2, but not 3, 4, and 5, but my PC can do them all.
It works well to print EggHolder_group5_1.meshmix.dual_edges.stl upside down, so that is how the model is placed in the stl file.
Printer:
FLSun Cube
Rafts:
No
Supports:
No
Resolution:
0.2mm, first layer 0.3mm.
Infill:
20%
Filament: any cheap brand, PLA 1.75mm, any color
Notes:
I used slicer Slic3r Prusa Edition V1.2.2-1.34.x and Repetier-Host V2.1.3.
