by 98abaile
A 6mm scale Epic 40K space marine rhino.
I made this because I wanted a non chunky printable model that was accurate.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.4 x 0.08
Infill:
5%
Filament: Sunlu PLA+ Yellow Gold
Notes:
Printed at 190"C on a 50"C heated bed with good part cooling and a brim. 6 top layers.
Remove from bed and remove brim and any very minor srtinging. I found the exhaust pipes to be kinda fragile, so be careful with them.
I checked out many 28mm rhino models and decided on the Rhino Like Transport by Da5id as a base to scale and modify.
Model was assembled and scaled to 21.43% in blender, then modified for printing. The doors were adjusted so that a seam appears. I then fattened the road wheels,viewport trim and headlights for printability and then bodged some admittedly ugly tracks together.
The top hatch was replaced with one from the Rhinoceros Sci-Fi Marine Transport by Karnage King. The cupola and Storm bolter were taken and modified from the Ground Plunderer Remix by niphilim.
I wasn't able to get the seam above the doors to show up in test prints, so I still need to experiment further with that.
Razorbacks are being developed off the back of this, followed by the whirlwind.