Wonderfull detailed model made by Astrofossil
Cleaned up the inside so it's now one part.
Cut the model in 2 sections 'back and front for easy printing.
Also cut off the bridge and engines sections so you can print the MID-sections with no infill (0 bottom/top layers and 0% infill + 3 or 4 shells for strenght)
I printed it that way, very fast print and saving material
Print Bridge and engines normally.
Model is 30 cm in total
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2