by GM_Mechworks
From the 1 Episode OVA "Metal Skin Panic: Madox 01" I present... the Madox 01.
Currently working on printing it at 0.3 layer height (with the "arms and pipes at 0.1mm). Probably need to use hot glue to get it all together or something.
Comes with a full 3d model for reference: I wouldn't advise printing it, there is a lot of cleanup need (as opposed to the parts, which have good geometry!). Depending on your unfolding software it might make it out at 0.1mm layer height.
Needless to say: SUPPORTS FOR EVERYTHING!
