If you want the pro files, you can dowload it here for free and support me! (also for free!):
(you have to sign in with google or facebook toverify the download!)
http://www.3dupndown.com/content/?pcode=cont_view&idx=9483
In order to use cusomizer, downbload the files and use Openscad's customizer!
Instructions:
Parts:
LEDS:
single color:
https://de.gearbest.com/kits/pp_437277.html?lkid=14836297
Multi color:
https://www.ebay.de/itm/10-Stueck-LED-5mm-RGB-Auto-Regenbogen-langsam-10000mcd-/372143426180
stepdown controller:
https://www.ebay.de/itm/1-Stueck-Spannungswandler-f-Blink-Flacker-und-Effekt-LEDs-AC-DC-5-24V-12V-/352072992295
A switch:
https://www.gearbest.com/development-boards/pp_157365.html?lkid=14836302
Cheap filament:
https://www.gearbest.com/3d-printer-supplies/pp_651311.html?lkid=14780363
This is a cool DIY lamp project. If you want to enlight it, you need a switch(as in the pictures), cables, LEDs, resistors and a 9V battery. The LED's are put through the holes at the bottom of the top part and connected via the switch with the battery. I took here a Voltage converter to control the LED's, and I used colour change LED's You need every part and to assmble it like in the picture. The Top and bottom of the top part wil side perfectly over each other(maybe you have to sand it a little bit.). The jellyfishes are mounted with the cables which support the leds with voltage to the top part.
Happy working!
Gearbest affiliate link:
https://www.gearbest.com?lkid=14836318
video:
https://www.youtube.com/watch?v=tHKjMSegY8Q
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
