by frak23
A basic 30' x 10' lobster boat for HO Scale Railroad or Miniature Scenes..etc. This model is waterline/flat-bottomed for HO scale layouts. I printed it with a fine profile on Cura with a 20% infill density, printed thin wall option(a 5+ hour print). Please feel free to change size: length, height or width thru scale. Please use little support under the roof. I used the Lines support patterns in Cura with 8-10% density.
Needed: HO Lobster men, HO scale lobster traps, HO scale boat steering wheel,...etc.
Measurements in HO Scale:
(1ft = 3.5mm)
24.5mm = 7ft
28mm = 8ft
31.5mm = 9ft
35mm = 10ft
42mm = 12ft
105mm = 30ft
112mm = 32ft
122.5mm = 35ft
Enjoy!
