This is my own take on this quirky and absolutely batshit crazy anti-hero. Unfortunately there's no Ryan Reynolds hiding beneath that mask, it's just Wade Wilson, but I think that's good enough!
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12mm
Infill:
10-15%
Notes:
I printed this on my CR-10S using some regular PLA, and the following settings:
Layer height: 0.12mm
Nozzle: 0.4mm
Perimeter: 0.8mm
Speed: 30mm/s
Top/bottom # layers: 6
Print time: Roughly 26 hours
You want to use supports for this one. Make sure the supports are automatically generated correctly as the ones my Simplify3D generated for me weren't very good, and I had to adjust them manually.
