The Mighty "Jug" !
Modeled from old drawings on an industrial CAD Software (Class A surfaces = perfect curves and tangeancies)
I've decided to reduce the number of details to highlight print lines.
The STL file is generated at low resolution. Working time on this model: 1 full day.
You can find very HIGH RESOLUTION STL here and support my work :
https://cults3d.com/fr/mod%C3%A8le-3d/maison/republic-p47-d-40-thunderbolt
NOTE for makers : I've replaced guns by holes because they are too small and not in the good direction to be printed well. Just cut some pieces of toothpick and put it in gun slots.
---------------------------- Français -----------------------
La méchante "Cruche"
Modélisé suivant d'anciens plans sur logiciel CAO (surfaces de classe A)
1 grosse journée de travail alors, pour m'aider, les fichiers STL en HAUTE DEFINITION sont la :
https://cults3d.com/fr/mod%C3%A8le-3d/maison/republic-p47-d-40-thunderbolt
Dans tous les cas, un petit clic sur "j'aime" et/ou devenir un de mes follower ne coûte rien et motive vraiment les designers comme moi à mettre leurs modèles en ligne.
Rafts:
No
Supports:
Yes
Notes:
2 way to print it :
1- The best way : In 2 part with supports ('ll be inside only) then glue it together = best result
2 - You can also print the full model horizontally but supports have to be removed under the wings. Advantage : no glue