My interpretation of the Ukrainian Ironbelly Dragon in The Harry Potter Series. It is still a work in progress and is my first project in Blender. Feel free to leave comments or ask questions!
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Notes:
I printed this with the nose facing away from the printer bed at a 30 degree angle. I would probably recommend flipping that orientation so that the horns turn out a little better (or at least provide enough support density to build up to the tops of them.
Be careful around the horns when removing support material. The mouth and teeth will also have support removed most likely.
